The manufacturer of this product disclaims any liability for consequences arising from omissions or inaccuracies in this manual and any other documentation provided with this product. The NMEA data port provides the connection to your chart plotter and consists of four wires colour coded as shown in the table below and in Figure 8. If you are using charting software running on a PC, please refer to the instructions provided with your chart plotting software for details of how to configure it to display AIS information. RF emissions notice The compass safe distance of this unit is 0. Thank you for buying this AIS receiver. Similar to class A transceivers in many ways, but are normally lower cost due to the less stringent performance requirements. These are similar to class B transceivers, but are designed to be fitted to large vessels such as cargo ships and large passenger vessels.
|Date Added:||24 November 2010|
|File Size:||55.45 Mb|
|Operating Systems:||Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X|
|Price:||Free* [*Free Regsitration Required]|
The port operates at baud. You may also need to enable the display of AIS targets in the chart options. RF emissions notice The compass safe distance of this unit is 0. Also included on the CD is the product manual.
advanSea Rx-100 Dual Channel Ais Receiver
Means of connecting the cables together will also be required. Accuracy of this manual Every effort has been made to ensure the packaging for this product is recyclable.
Please refer to Figure 6 for guidance. Connect the red wire to the power supply positive terminal.
Advansea AIS RX |
The following sections give a brief overview of each item. Please refer to the user manual supplied with your chart plotter for details of how to connect and configure advandea chart plotter for use with AIS devices.
Do not install this equipment in a flammable atmosphere such as in an engine room or near to fuel tanks. The NMEA data port provides the connection to your chart plotter and consists of four wires colour coded as shown in the table below and in Figure 8. Please take note of the warnings in section 1 regarding the use of antennas. Please contact your dealer for details of suitable products.
The manufacturer of this product disclaims any liability for consequences arising from omissions or inaccuracies in this manual advabsea any other documentation provided with this product. This equipment must be installed in accordance with the instructions provided in this manual.
If your VHF antenna does not use this type of connector please contact your dealer for details of available adaptors. Thank you for buying this AIS receiver.
Please take the time to familiarise yourself with the system elements and their connections prior to attempting installation.
When reading this manual please pay attention to warnings marked with the warning triangle shown on the left. Please refer to section 3. Antenna cables Alternatively, if you wish to use an existing VHF antenna, antenna splitter products are available which allow the existing antenna to be used with two radio devices, rc-100 as a VHF voice radio and the AIS RX Please dispose of the packaging in an environmentally friendly manner.
advanSea AIS RX Receiver | Absolute Marine
AIS receivers will generally receive transmissions from class A transceivers, class B transceivers, AtoNs and AIS base stations but do not transmit any information about the vessel on which they are installed.
It is recommended that crimped and soldered lugs are used to connect the AIS RX to the power source. Before beginning installation of your AIS RX, please ensure you have the necessary additional items as detailed in section 3.
We constantly strive to achieve the highest possible quality standards, should you encounter any problems with this product, please contact your dealer who will be pleased to offer whatever assistance you require. Please ensure your NMEA device operates at baud. Class A transceivers transmit at a higher VHF signal power than class B transceivers and therefore can be received by more distant vessels, and also transmit more frequently.
The NMEA data port output operates at a baud rate of baud. In addition to the items provided with your AIS RX the following items will be required for installation: These are similar to class B transceivers, rx-00 are designed to be fitted to large vessels such as cargo ships aie large passenger vessels.
If it is not sufficient you will need an extension cable. Connecting an optional NMEA advanxea Wire colour NMEA function Please note that the ‘Receive’ connections should not be connected aks your chart plotter as it is not normal for the receiver to receive data from the chart plotter. The status indicator will illuminate when power is applied to the unit and it is running in normal mode. VHF antenna Installation 3. The NMEA input baud rate is baud.