After cutting, the printer will feed the label for 8 inches. Isolate the power cord from other electrical cables. If the printer supports Plug-and-Play, and you have successfully connected it using a USB cable, then the Windows Add Hardware Wizard will automatically detect the printer and display a dialog that allows you to install a driver. It decides which setting method – by command or by LCD panel, is prior. If the problem persists, replace the print head. Windows Server , R2, , R2, and Turn on the printer.

Uploader: Vozahn
Date Added: 13 January 2009
File Size: 63.45 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 9535
Price: Free* [*Free Regsitration Required]

Windows Vista, Windows 7, Windows 8 and 8. Check if the printer power is turned on.

W mm x H mm x D mm. For example, the first option of print modes is thermal transfer.

Install the ribbon and media. A label is printed. If damage has occurred, contact your shipping company immediately to file a claim. Return the outside media guide, close the bracket, and hook the head latch.

On the contrary, DHCP setting is enabled. Do not connect this pin if you use a general host such as a PC.

ARGOX X-3200

The pin assignment of serial cable is different from PC. Unwrap the ribbon and separate the ribbon roll from the bare core. The heavy duty is arogx of 5ips print speed using its bit RISC microprocessor. Do not touch print head surface by bare hands or with any hard equipment. It’s a community-based project which helps to repair anything.


Argox X |

Insert the left side of dispenser bracket and secure the xx-3200 screws to the TPH module. The screens included for these steps are taken argkx Windows XP; steps in other versions of operation systems are similar.

Repeat Step 1; if the printing quality has not been gradually improved after five times, counterclockwise rotate five circles back to the original position and then proceed Step 3. Check the active printer driver, and see if Seagull Driver for your Windows system and the label printer has been selected.

The language selection screen appears.

Argox x pplb drivers download

Related questions Dear Sir, Can i connect directly to Argox ppla printer using php? If the quality is improved, stop the adjustment; if not, continue with next step.

Transmission Problems If the polb shows “Printer Time out” 1. When using a keyboard or barcode reader communicating with a host through the Centronics or serial port is prohibited. It is to control cut actions of guillotine cutter. In Dump mode, all characters will be printed in 2 columns: If the test print appears as Figure A, remain the screw at the right of Ribbon Bracket argoxx, then loose the screw at the left, and gradually fine-tune upward, until the print quality gets improved.


For unstable ribbon roll rotation, check the label path and make sure the head latch is securely closed.

Now printer is in normal printing mode. Refer to the following examples. If the data has been sent, but x-3200 is no output from the printer.

Illustrations are provided to help you quickly become familiar with the printer. The manual argos a guide to operate the printer as well as related information on troubleshooting, maintenance, and technical reference. The procedure above is for first time installation or after cutter jam. Roll-feed, die-cut, continuous, fan-fold, tags, ticket in thermal paper or plain paper and fabric label.