AVERY DENNISON ALX 925 DRIVER

The direct thermal process requires label material with a temperature-sensitive coating. Push the beginning of the label material through underneath the contact rollers and the print head. Size of the ribbon roll: Insert the end of the backing paper into the rewinder as illustrated [13]. Pull the ribbon under the printhead from the side, then, unwinding some ribbon, smoothen it out [16].

Uploader: Ferisar
Date Added: 15 July 2017
File Size: 35.10 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 22831
Price: Free* [*Free Regsitration Required]

Retighten the thumb screw. The direct thermal process requires label material with a temperature-sensitive coating. The ribbon must run evenly and free of creases between the mandrels while being fed through.

Printer Drivers European | Avery Dennison

Distance of the punch from the inner edge of the material [21A]. Dispenser parameters Set the following parameters prior to first operating the machine. P For information on choosing a 295 thermal transfer ribbon, refer to section Selecting the printing material on page 4.

Furthermore, installing the wrong Avery Dennison drivers can make these problems even worse.

ALX , ALX and ALX Setup Manual |

Draw ribbon upwards and guide it around the ribbon roller [17A], the ribbon deflection roller [17B] and the strain relief [17C]. B [5] Adjusting the material guide B. The surface of the label material determines which thermal transfer ribbons produces the best adhesion. Value on dial, set by rotating the red wheel. Position the spring-suspended blocks [10A] in a way that the contact rolls press symmetrically on the backing paper.

  LG KU990 MODEM DRIVER DOWNLOAD

To ensure in those cases, that the label start is correctly identified, a punch offset can dfnnison preset. This changes the colour of the coating.

Direct thermal Direct thermal printing is done without ribbon. Remove the rewound backing paper. Position the spring-suspended block [10A] in a way that the contact roll presses in the middle on the backing paper.

Pull the empty ribbon core off the unwinding mandrel and put it on the rewinding mandrel. P Continued overleaf ALX 92x with half used up label roll. Solvusoft is recognized by Microsoft as a leading Independent Software Vendor, achieving the highest level of svery and excellence in software development.

Avery Dennison ALX 924 Setup Manual User Manual

This tool will download and update the correct Avery Dennison ALX driver versions automatically, protecting you against installing the wrong ALX drivers. As a result, the print quality may degrade — particularly at high print speeds.

The material and the ribbon take longer to cool. Pull the ribbon under the printhead from the side, then, unwinding some ribbon, smoothen it out [16]. Put the ribbon roll on the lower right ribbon mandrel [15C]. This is achieved by correctly setting the torque for the rewinding mandrel and the braking torque for the unwinding mandrel. Position the contact rollers while pressing down the opener [7].

  AUDIGY 1394 XP DRIVER

Rotating parts can trap items and draw them in!

A [2] Assuming backing paper has gathered on the rewinder: Unsuitable ribbons can lead to poor printing results. As a Gold Certified Independent Software Vendor ISVSolvusoft is able to provide the highest level of customer satisfaction through delivering top-level software and dennisoon solutions, which have been subject to a rigourous and continually-audited approval process by Microsoft.

This can led to poor printing results. A C [15] Inserting the ribbon roll onto the avdry unwinding mandrel C.

This transfers the colour particles to the label. Guide the ribbon end under the ribbon deflection [15B] and thread through to the side of the printhead [15A].